Gavin J. Parker1, Chun H. Ong2, Robert B. Manges3, Emma M. Stapleton3, Alejandro P. Comellas3, Thomas M. Peters 2, Elizabeth A. Stone 2


Department of Chemistry, University of Iowa, Iowa City, IA 52242, USA
Occupational and Environmental Health, University of Iowa, Iowa City, IA 52242, USA
Department of Internal Medicine, Roy J. and Lucille A. Carver College of Medicine, University of Iowa, Iowa City, IA 52242, USA


Received: April 3, 2019
Revised: August 28, 2019
Accepted: September 13, 2019
Download Citation: ||https://doi.org/10.4209/aaqr.2019.04.0182  


Cite this article:
Parker, G.J., Ong, C.H., Manges, R.B., Stapleton, E.M., Comellas, A.P., Peters, T.M. and Stone, E.A. (2019). A Novel Method of Collecting and Chemically Characterizing Milligram Quantities of Indoor Airborne Particulate Matter. Aerosol Air Qual. Res. 19: 2387-2395. https://doi.org/10.4209/aaqr.2019.04.0182


Highlights

  • A method was developed to collect milligrams of indoor particulate matter.
  • Collection efficiency and particulate recovery were characterized.
  • Samplers were successfully deployed in 21 homes.
  • Particulate metals were dominated by crustal elements.

 

ABSTRACT


Because people spend the majority of the day indoors, it is important to evaluate indoor air, especially airborne particulate matter (PM), for its potential health effects. However, collecting milligram-sized samples of indoor PM, which are necessary for detailed chemical and biological assays, remains challenging because of the noise, power requirements, and size of traditional PM samplers. Therefore, we developed a novel method of collection using an electrostatic precipitator (ESP). Laboratory experiments were conducted to characterize the ESP collection efficiency (41–65%) and PM recovery (50–95%) for three aerosol types. After characterization, the ESPs were deployed in 21 homes in eastern Iowa for 30 days, during which they collected 6–87 mg of indoor PM. The samples were acid digested and subsequently analyzed by inductively coupled plasma mass spectrometry for their magnesium, aluminum, vanadium, manganese, iron, nickel, copper, zinc, arsenic, and lead content. Crustal metals (magnesium, iron, and aluminum), ranging from 3,000 to 25,000 ng mg–1 in concentration, contributed the largest mass fractions of the PM. The relative abundances of the metals were similar between homes, although the PM mass fractions were highly variable. This ESP sampling method can be applied in future studies to collect milligram-sized quantities of indoor PM, enabling a detailed analysis of its composition and potential health effects.


Keywords: Indoor air; Particulate matter; Electrostatic precipitation; Metals.



Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.