Hung-Yi Lu1, Yee-Lin Wu 1, Justus Kavita Mutuku 1, Ken-Hui Chang2


Department of Environmental Engineering, National Cheng Kung University, Tainan 70101, Taiwan
Department of Safety, Health and Environmental Engineering, National Yunlin University of Science and Technology, Yunlin 64002, Taiwan



Received: January 16, 2019
Revised: February 24, 2019
Accepted: February 24, 2019
Download Citation: ||https://doi.org/10.4209/aaqr.2019.01.0024  

  • Download: PDF


Cite this article:
Lu, H.Y., Wu, Y.L., Mutuku, J.K. and Chang, K.H. (2019). Various Sources of PM2.5 and their Impact on the Air Quality in Tainan City, Taiwan. Aerosol Air Qual. Res. 19: 601-619. https://doi.org/10.4209/aaqr.2019.01.0024


HIGHLIGHTS

  • Air pollution characteristics were analyzed in six cities of Tibetan Plateau.
  • Air pollutants are more prevalent in Lhasa and Nagchu than in other sites in Tibet.
  • All pollutants except O3 have higher concentrations in winter than those in summer.
  • Diurnal PM2.5, PM10, SO2, NO2, and CO values showed two peaks around noon and midnight.

ABSTRACT


The recent deterioration of Taiwan's air quality is partly due to fine particulate matter (PM2.5). With several studies pointing out a direct link between PM2.5 and the global disease burden, plans are underway to reach the standard of an annual average PM2.5 concentration of 15 µg m–3 in Taiwan by 2020. Subsequently, environmental protection bureaus in all cities should assess PM2.5 emission sources and implement control strategies. This study focuses on analysis of PM2.5 sources within Tainan City in an effort establish the contribution of large-scale pollution sources within the city as well as those from neighboring counties and cities. During this study, the top nine largest emission sources in Tainan City were investigated: (1) the Chemical manufacturing industry, (2) the iron and steel industry, (3) the power industry, (4) manufacturing of coal-based products, (5) diesel vehicles, (6) two-stroke scooters, (7) catering, (8) construction/road dust, and (9) open burning. Three important pollution sources in the central region of Taiwan were investigated as well, including: (1) the Taichung Power Plant, (2) the Formosa Petrochemical Corporation (FPCC) Sixth Naphtha Cracking Industry, and (3) the Dragon Steel Company in Taichung City, Changhua County, and Yunlin County, respectively, all of which are located on the windward side of Tainan City. The Community Multiscale Air Quality Model (CMAQ) was used to simulate the impact of the mentioned sources on Tainan’s air quality. The results for the monthly contributions from the different sources averaged over a one year period indicated that diesel vehicles are the largest source, emitting up to 1.06 µg m–3, followed by the Taichung Power Plant, which had 0.87 µg m–3 the construction industry and road dust emissions, with 0.80 µg m–3, and with open burning of waste having the lowest contribution. These results can be applied to facilitate the development of follow-up air quality control strategies.


Keywords: Emission source; Different pollution sources; Tainan City; Air quality model (CMAQ); PM2.5.

 


Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.