Angus Shiue1, Shih-Cheng Hu1, Chao-Heng Tseng 2, Cheng-Mao Chuang2, Graham Leggett3

Department of Energy and Refrigerating Air-Conditioning Engineering, National Taipei University of Technology, Taipei 10608, Taiwan
Institute of Environment Engineering and Management, National Taipei University of Technology, Taipei 10608, Taiwan
MIRICO Ltd., OX11 0QX, United Kingdom

Received: April 9, 2018
Revised: July 12, 2018
Accepted: July 16, 2018
Download Citation: ||  

  • Download: PDF

Cite this article:
Shiue, A., Hu, S.C., Tseng, C.H., Chuang, C.M. and Leggett, G. (2018). Assessment of Adsorptive Filter for Removal of Formaldehyde from Indoor Air. Aerosol Air Qual. Res. 18: 3147-3164.


  • Investigated the formaldehyde adsorption process on activated carbon filter media.
  • Discussed pseudo-first- & second-order, and intra-particle diffusion kinetic model.
  • Verified the best prediction accuracy to pseudo-second-order kinetic model.


We varied face velocities and initial formaldehyde concentrations to investigate the formaldehyde removal performance of coconut shell activated carbon (AC) adsorptive filter media. AC surface were rather uneven, with coarse and small pores, and with amorphously formed irregular layer structures. C, O, Mg, P etc. were detected, which showed the existence of MgO in AC. The AC surface area was 1333.3304 m2 g–1, and ketone -C=O bonds were successfully grafted onto the carbon. At any given face velocity, the experimental results indicate that the adsorption capacity increased and the breakthrough time decreased as the initial concentration increased. The breakthrough behavior of the AC adsorptive filter could henceforth be evaluated with confidence using the breakthrough curves predicted by the Yoon-Nelson model. Of the three kinetic models that were assessed, the experimental and calculated results show that the correlation coefficient and mean absolute performance error (MAPE) of the pseudo-second-order model generated the best approximation of the kinetic dynamics of the adsorption process—better than those of the pseudo-first-order model and intraparticle diffusion model. Both the intraparticle diffusion model and the membrane diffusion affected the overall rate of the adsorption process by more than one step. The equilibrium data of the AC adsorptive filter media was found to best fit the Langmuir model. The D-R equation predicted the equilibrium capacity of AC at a relative pressure of 0.151.

Keywords: Adsorption; Breakthrough; Kinetic model; Formaldehyde.


Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

77st percentile
Powered by
   SCImago Journal & Country Rank

2022 Impact Factor: 4.0
5-Year Impact Factor: 3.4

Aerosol and Air Quality Research partners with Publons

CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit
CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.