Chunyan Diao1, Xingmeng Guo1, Jianfeng Li 1,2


Guizhou Minzu University, Guiyang, Guizhou 550025, China
School of Environment, Guangzhou Key Laboratory of Environmental Exposure and Health, and Guangdong Key Laboratory of Environmental Pollution and Health, Jinan University, Guangzhou 510632, China



Received: December 3, 2017
Revised: January 28, 2018
Accepted: February 2, 2018
Download Citation: ||https://doi.org/10.4209/aaqr.2017.10.0412  

  • Download: PDF


Cite this article:
Diao, C., Guo, X. and Li, J. (2018). Research on Urea Jet Pump Performance Characteristics using the Optimized NOx Removal Equipment in Diesel Engine. Aerosol Air Qual. Res. 18: 1886-1900. https://doi.org/10.4209/aaqr.2017.10.0412


HIGHLIGHTS

  • To test the urea injection volume and the conversion efficiency.
  • To understand influences of different urea injection pump performance.
  • To understand the mechanism of NOx cutting.

ABSTRACT


ABSTRACT

There are many factors that affect the efficiency of NOx conversion in the diesel engine SCR (selective catalytic reduction) post-processing system. In this study, we researched the factors affecting the efficiency of NOx conversion by engine bench testing. The SCR system was applied to the Weichai WD615 engine exhaust. First, the system used DOC (Diesel Oxidation Catalyst)/DPF (Diesel Particulate Filter) of which DOC is a noble metal-containing filter, it lets the filter passes through converting nitrogen monoxide (NO) to nitrogen dioxide (NO2) for passive regenerations and to provide high hydrocarbon (HC) oxidation activity for active DPF regenerations, the DPF is a wall-flow filter used to trap the remaining soot that the DOC can not oxidize. The combined catalytic oxidation device improved the original SCR deNOx system, which we developed. The new catalytic oxidation apparatus has a simple structure and fundamentally solves the clogging problem of the SCR method and the defects led by the unstable gaseous ammonia generation. Secondly, we studied the influence of an increased urea injection on the conversion efficiency of NOx and the secondary pollution of NH3 at different speeds and torques of the engine. It was found that at the maximum removal rate, the downstream NOx concentration was only 1 ppm. The NOx conversion efficiency can reach 79.10% or more—even 99.90%. Finally, we used the KDS and the BOSCH urea injection pumps to analyze the effect of different pumps on the conversion efficiency of NOx. Hence, the matching diesel engine urea SCR post-processing system can reduce the emission concentration and pollution. There was little difference between the two pumps under most of the working conditions, although KDS was a little better than BOSCH under some individual conditions.


Keywords: Diesel engine exhaust; Optimized catalytic device; SCR system; Urea injection; Conversion efficiency.

 


Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.