Hirotoshi Kuwabara1, Kazuhiko Sekiguchi 1, Kenshi Sankoda1, Kenji Sakurai1, Ryosuke Yamaguchi1, Masami Furuuchi2, Mitsuhiko Hata2

  • 1 Graduate School of Science and Engineering, Saitama University, Sakura, Saitama, Japan
  • 2 Graduate School of Natural Science and Technology, Kanazawa University, Kanazawa, Ishikawa 920-1192, Japan

Received: December 11, 2015
Revised: March 10, 2016
Accepted: April 5, 2016
Download Citation: ||https://doi.org/10.4209/aaqr.2015.12.0679 

  • Download: PDF


Cite this article:
Kuwabara, H., Sekiguchi, K., Sankoda, K., Sakurai, K., Yamaguchi, R., Furuuchi, M. and Hata, M. (2016). Evaluation of Artifacts Generated during Collection of Ultrafine Particles Using an Inertial Filter Sampler. Aerosol Air Qual. Res. 16: 3063-3074. https://doi.org/10.4209/aaqr.2015.12.0679


HIGHLIGHTS

  • The UFPs collection by several filter stages was a convenient and useful method.

  • Gas adsorption by the INF sampler was similar to that of other devices.

  • The choice of a PTFE filter and its stacking were important to collect UFPs.

 

ABSTRACT


Two artifacts were observed during collection of atmospheric ultrafine particles (UFPs; < 100 nm diameter) using an inertial filter (INF) sampler recently developed for this purpose. These artifacts were evaluated. First, the adsorption of organic and ionic gas onto a quartz fiber filter installed in the INF sampler was evaluated to provide information on the positive artifact; this information is important for accurate analysis of the UFP components. Gas adsorption by the INF sampler was similar to or less than that of other devices for collecting UFPs. The gas adsorption of organic carbon (OC) fractions, and ionic components of NH4+, NO3 and SO42– was confirmed, and the adsorption of OC1 and ionic components were highly dependent on the concentration of the gas and the UFP concentration under ambient conditions. These results suggest that it is necessary to know the concentration of the UFPs on the filter in order to evaluate the exact concentrations of UFP components under high flow rate conditions. Second, the efficiency of UFP collection on a polytetrafluoroethylene (PTFE) filter installed in the INF sampler was evaluated to clarify the negative artifact. The data confirmed that the efficiency of collection changed with changing structure such as pore size, porosity and thickness of the filter. The structure of these filters and UFPs collected on there were observed by a scanning electron microscopy. The highest particle collection efficiency (almost 100%) was obtained by installing two thick membrane PTFE filters. The collection of UFPs using a sampler comprising several filter stages is a convenient and useful method for evaluating positive and negative artifacts and for quantifying the concentration of components of UFPs.


Keywords: Gas adsorption; Collection efficiency; Carbon components; Ionic components


Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

Latest coronavirus research from Aerosol and Air Quality Research

2018 Impact Factor: 2.735

5-Year Impact Factor: 2.827


SCImago Journal & Country Rank

Sign up to AAQR Newsletter

Sign up to receive latest research, letters to the editors, and review articles, delivered to your inbox every second week!