Herek L. Clack

  • Department of Civil and Environmental Engineering, University of Michigan, 2350 Hayward Street, Ann Arbor, Michigan 48109, USA

Received: May 8, 2015
Revised: August 31, 2015
Accepted: September 28, 2015
Download Citation: ||  

  • Download: PDF

Cite this article:
Clack, H.L (2015). Simultaneous Removal of Particulate Matter and Gas-Phase Pollutants within Electrostatic Precipitators: Coupled In-Flight and Wall-Bounded Adsorption. Aerosol Air Qual. Res. 15: 2445-2455.


  • Simulation of combined particle collection and trace pollutant removal in an ESP.
  • In-flight mechanism for trace pollutant removal far exceeds wall-bounded mechanism.
  • Dual-objective ESP performance metric introduced.
  • In-flight and wall-bounded mechanisms for trace pollutant removal are not additive.



Older combustion facilities are favored to comply with imposed regulations limiting emissions of trace toxic metals by modifying the operation of existing emissions control devices to concurrently capture the regulated toxic metal compound; a prominent example of this is adsorption of mercury by added activated carbon within electrostatic precipitators (ESPs). Our previous quasi-1-D analyses employed simplifying assumptions, some of which were initially proposed decades ago. The present study leverages a modern computational platform to remove restrictive, simplifying assumptions and capture details of multi-phase flows and electric and electro-hydrodynamic phenomena that were previously out of computational reach. The results reveal the conflicting interdependent trends in particulate matter (PM) collection and adsorption of a trace gas-phase pollutant, assumed here to be mercury. In particular, we show the power of the inverse correlation between PM removal efficiency and trace pollutant adsorption efficiency, for two representative particle size distributions for increasing treatment times and under constant electrical conditions (applied voltage and current density). Also noteworthy is the finding that the two mechanisms of trace pollutant adsorption within an ESP, in-flight adsorption by suspended sorbent particles and wall-bounded adsorption by sorbent-covered walls, cannot be treated as additive. Wall-bounded adsorption depletes trace pollutant concentrations in the concentration boundary layer near the walls, reducing the driving potential for in-flight adsorption in these regions. For the conditions simulated, the additional rate of pollutant removal by the former is almost entirely counter-balanced by diminished rates of pollutant removal by the latter. Such findings highlight the need to optimize emissions control processes originally designed for a single pollutant but operated for the purpose of dual-pollutant control.

Keywords: Mercury; Activated carbon; Toxic metals; Coal; Flue gas

Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

77st percentile
Powered by
   SCImago Journal & Country Rank

2021 Impact Factor: 4.53
5-Year Impact Factor: 3.668

Aerosol and Air Quality Research partners with Publons

Aerosol and Air Quality Research partners with Publons

CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit
CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.