Shun-Xiang Huang1,3, Ji-Ping Zhang 2,3, Wei-Di Yang1, Zi-Fa Wang3, Fei Hu3, Feng Liu1, Li Sheng4, Qing-Cun Zeng3

  • 1 Institute of Chemical Defense, Beijing 102205, China
  • 2 Beijing Institute of Applied Meteorology, Beijing 100029, China
  • 3 Institute of Atmospheric Physics, Chinese Academy of Sciences, Beijing 100029, China
  • 4 National Meteorological Center of China Meteorological Administration, Beijing 100081, China

Received: December 12, 2014
Revised: March 24, 2015
Accepted: July 8, 2015
Download Citation: ||https://doi.org/10.4209/aaqr.2014.12.0320  


Cite this article:
Huang, S.X., Zhang, J.P., Yang, W.D., Wang, Z.F., Hu, F., Liu, F., Sheng, L. and Zeng, Q.C. (2016). Predicting and Controlling Nuclear Accident Hazards: Issues and Challenges. Aerosol Air Qual. Res. 16: 417-429. https://doi.org/10.4209/aaqr.2014.12.0320


HIGHLIGHTS

  • We propose a novel architecture of hazard prediction and control for nuclear accidents.
  • We propose an optimal control method for nuclear emergencies.
  • We develop a rapid source inversion based on the Lagrange method.
  • Issues and challenges of nuclear accident hazard prediction and control are summarized.

 

ABSTRACT


Global nuclear security is threatened by nuclear accidents and the purposeful use of nuclear weapons. Accordingly, atmospheric pollution prediction and control for nuclear accidents, including identifying sources in nuclear or radiological incidents, predicting hazards to persons and environments, and optimally controlling accident hazards, are current areas of nuclear security research. Source inversion, hazard prediction, and optimal control are three interrelated key issues for nuclear accident emergencies. Although progress has been made in hazard prediction for nuclear accidents since the 1970s and some source inversion methods were presented after the Fukushima nuclear accident, optimal control methods are rarely reported, source inversion methods are less practical, and prediction accuracy remains unsatisfactory. Thus, novel theories are required for optimal control and source inversion for nuclear accidents, and to develop methods for simulating the influences of radioactive plume dispersion and deposition under complex meteorological and terrain conditions. This work reviews the current progress, uncertainties, and research needs in nuclear security. In addition, a rapid source inversion method based on the Lagrangian model is developed and implemented in a test case. To address future challenges, an innovative architecture for Atmospheric Pollution Prediction and Optimal Control System for nuclear accidents (APPOCS) is proposed, and the perspectives are generalized to promote future research on nuclear accident hazard prediction and optimal control. At this time, forward-looking ideas and revolutionary perspectives are required to foster nuclear security research in the academic community.


Keywords: Nuclear accident; Hazard prediction; Optimal control; Atmospheric dispersion; Source inversion


Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

Latest coronavirus research from Aerosol and Air Quality Research

2018 Impact Factor: 2.735

5-Year Impact Factor: 2.827


SCImago Journal & Country Rank