Heinz Kaminski , Mathias Beyer, Heinz Fissan, Christof Asbach, Thomas A.J. Kuhlbusch

  • Institute of Energy and Environmental Technology (IUTA e.V.), Bliersheimer Str. 58–60, 47229 Duisburg, Germany

Received: March 29, 2014
Revised: July 8, 2014
Accepted: August 6, 2014
Download Citation: ||https://doi.org/10.4209/aaqr.2014.03.0065  

  • Download: PDF

Cite this article:
Kaminski, H., Beyer, M., Fissan, H., Asbach, C. and Kuhlbusch, T.A. (2015). Measurements of Nanoscale TiO2 and Al2O3 in Industrial Workplace Environments – Methodology and Results. Aerosol Air Qual. Res. 15: 129-141. https://doi.org/10.4209/aaqr.2014.03.0065


  • Strategy to conduct measurements of nanoscale particles in industrial workplaces.
  • Development of a methodology to distinguish process and background particle.
  • Analysis delivers size resolved information on the potential nanoparticle exposure.
  • Measurements in eight different industrial workplaces of two different plants.



The possible release of engineered nanomaterials was investigated based on a previously developed but now refined methodology. Data from altogether eight industrial work areas in production plants of nanostructured TiO2 and Al2O3 particles were obtained and used to test the methodology and to derive a first assessment of possible exposure of workers. Particle size distributions were determined in work area environments with concurrent measurements at a comparison site. Data from the comparison site were used to estimate the particle background level in the work area and distinguish it from potentially released nanomaterial. The analysis is based on the comparison of time resolved data from the work area and the comparison site as well as data determined during periods with and without work activities in the work area. The data analysis method introduced delivers size-resolved information on the potential nanoparticle exposure of workers.

A significant release of particles in the size range 100–562 nm was observed in the work area of bagging aluminum oxide and is stemming from damaging or overfilling of bags, and the necessary activities during the cleaning of the work area. The maximum particle diameter of these particles was around 340 nm. At all other investigated locations no significant releases of particles in the size range 100–562 nm were determined. Also, no significant release of particles < 100 nm was observed in all work areas.

The average PM10 exposure during the work activities varied from 48 to 1,330 µg/m3 in the different work areas. The maximum concentrations of aluminum were 118 µg/m3 and 58 µg/m3 for PM10 and PM1, respectively, during the bagging of Al2O3 in small bags. In comparison, the maximum concentrations of titanium were 550 µg/m3 and 434 µg/m3 for PM10 and PM1, respectively, during the bagging of TiO2 and indicate a significant release of coarser particles.

Keywords: Nanoparticles; Exposure; TiO2; Al2O3; Measurement strategy; Data analysis

Don't forget to share this article 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.