Chong-Fang Song1, Lin Peng 1, Jun-Ji Cao2, Ling Mu1, Hui-Ling Bai1, Xiao-Feng Liu1

  • 1 College of Environmental Science and Engineering, Taiyuan University of Technology, 79 Yingze West Street, Taiyuan 030024, China
  • 2 Key Laboratory of Aerosol, SKLLQG, Institute of Earth Environment, Chinese Academy of Sciences, Xi’an, 710075, China

Received: December 6, 2013
Revised: February 2, 2014
Accepted: February 14, 2014
Download Citation: ||  

  • Download: PDF

Cite this article:
Song, C.F., Peng, L., Cao, J.J., Mu, L., Bai, H.L. and Liu, X.F. (2014). Numerical Simulation of Airflow Structure and Dust Emissions behind Porous Fences Used to Shelter Open Storage Piles. Aerosol Air Qual. Res. 14: 1584-1592.


  • Applying surface shear stress to define calculation domain. 
  • Vector analyzes of the stress on each surface of a storage pile. 
  • Position that the maximum dust emission occurred vary with fence porosity. 
  • Simulations of shear stress avoiding distortion caused by vector offset.



Porous fences can reduce dust emissions from storage piles in open storage yards, but their sheltering effect depends on the airflow structure around the pile, and the shear stress distribution on each surface. In this study, static flow fields were numerically simulated using the standard k-ε turbulence model; the shear stress characteristics and distribution on the windward side, flat-top surface, and leeward side of a typical prismatic material stack were analyzed. The distribution of the aerodynamic structure of each surface of the storage pile was determined according to the flow field data for fences of the porosities ε = 0, 0.2, 0.3, 0.4, 0.5, and 0.6. The results indicated that at low porosities (ε = 0, 0.2) a recirculating flow appeared in the region between the fence and the pile. The shear force acted downward the windward slope, and the maximum dust emission occurred at two-thirds the height of the windward side, rather than at the top, as in unfenced conditions. Using the porous fence simulated in this study, shear stress on the windward side and the flat-top surface first decreased, then increased with increasing porosity; the lowest porosity values were 0.2 and 0.3, and the shear stress on the prismatic leeside changed little with increasing porosity. The numerical predictions indicated that a fence with porosity between 0.2 and 0.3 is optimal.

Keywords: Computational fluid dynamics (CFD); Open storage pile; Dust emission; Porous fence

Don't forget to share this article 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

Latest coronavirus research from Aerosol and Air Quality Research

2018 Impact Factor: 2.735

5-Year Impact Factor: 2.827

SCImago Journal & Country Rank

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal, promotes submissions of high-quality research, and strives to be one of the leading aerosol and air quality open-access journals in the world.