Jianming Wei

  • Institute for Nanostructures and Technology, Faculty of Engineering Science, and CENIDE (Center for Nanointegration, Duisburg-Essen), University of Duisburg-Essen, 47057 Duisburg, Germany

Received: December 30, 2012
Revised: March 20, 2013
Accepted: March 20, 2013
Download Citation: ||https://doi.org/10.4209/aaqr.2012.12.0369  

  • Download: PDF

Cite this article:
Wei, J (2013). A Fast Monte Carlo Method Based on an Acceptance-Rejection Scheme for Particle Coagulation. Aerosol Air Qual. Res. 13: 1273-1281. https://doi.org/10.4209/aaqr.2012.12.0369



A fast acceptance-rejection scheme that can boost the performance of Monte Carlo methods for particle coagulation has been designed and validated in this article. The central idea behind this scheme is to perform a fast evaluation of the maximum coagulation rate by making full use of the information of those particle pairs that are already generated to determine the desired coagulation pair. To this end, numerical experiments are carried out to establish a connection between the average coagulation rate obtained from information of those already generated particle pairs and the maximum coagulation rate. The correctness of the proposed scheme is then validated by comparing it to some established methods, adopting a physically realistic Brownian coagulation kernel. The computational efficiency of the fast AR scheme is finally measured.

Keywords: Monte Carlo; Aerosol; Particle; Coagulation; Acceptance-rejection

Don't forget to share this article 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.