Rissa V. Niyobuhungiro , Harro von Blottnitz

  • Environmental and Process System Engineering Group, Department of Chemical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701, South Africa

Received: June 15, 2012
Revised: September 28, 2012
Accepted: September 28, 2012
Download Citation: ||https://doi.org/10.4209/aaqr.2012.06.0148  

  • Download: PDF

Cite this article:
Niyobuhungiro, R.V. and Blottnitz, H.v. (2013). Investigation of Arsenic Airborne in Particulate Matter around Caterers’ Wood Fires in the Cape Town Region. Aerosol Air Qual. Res. 13: 219-224. https://doi.org/10.4209/aaqr.2012.06.0148



Smoke from wood fires has long been recognized as a significant health hazard. Our recent work has reported on the occurrence of waste timber previously treated by chromated copper arsenate (CCA) insecticide in the fuel supplies of informally operating caterers in the Cape Town region. The main objective of this paper is to report evidence that the burning of CCA-treated wood by informal caterers does lead to arsenic enrichment of the smoke.

Atmospheric particulate matter with aerodynamic diameter ≤ 10 μm (PM10) was collected using an Air Metrics MiniVol portable aerosol sampler onto quartz filters for durations varying from 1 h to 4 h, at 5 L/min. Smoke was first sampled under controlled conditions, in which CCA-treated samples (of hazard classes H5 and H2) and two untreated wood samples were burned. 18 field samples were collected, from Nyanga, Langa and Khayelitsha (Cape Town) and Kayamandi (Stellenbosch). The PM10 concentrations were calculated and the smoke samples were microwave-digested using nitric acid for metals analysis by ICP-AES.

Under controlled conditions, the concentrations of arsenic volatilised from (H2 and H5) were 19 and 52 μg/m3, and the As:Cu and As:Cr ratios strongly increased compared the ratios found in the timber. The lowest concentration of PM10 was found around the Nyanga taxi rank at a distance of ± 100 m from caterers, at 33 μg/m3, while the highest concentration was 8139 μg/m3 for a 1-hour sample representing occupational exposure close to wood burning fires. Arsenic was detected in 15 smoke samples. The average arsenic level of positive samples was 1.3 μg/m3. The arsenic levels measured exceed normal background levels, which have been reported by the WHO to be 0.02–4 ng/m3 in rural air and up to 30 ng/m3 in urban air.

Keywords: PM10; Arsenic exposure; CCA-treated wood; Smoke; Wood burning

Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

77st percentile
Powered by
   SCImago Journal & Country Rank

2022 Impact Factor: 4.0
5-Year Impact Factor: 3.4

Aerosol and Air Quality Research partners with Publons

CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit
CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.