Yassine El May1,2, Sophie Dorge1, Mejdi Jeguirim1, Gwénaelle Trouvé 1, Rachid Said2

  • 1 Laboratoire Gestion des Risques et Environnement, Université de Haute Alsace, 3 bis rue Alfred Werner, 68093, MULHOUSE Cedex, France
  • 2 Unité de Recherche d’Etude des Milieux Ionisés et Réactifs (UR EMIR), IPEIM, Avenue Ibn El Jazzar Monastir 5019, Tunisie

Received: March 7, 2012
Revised: July 13, 2012
Accepted: July 13, 2012
Download Citation: ||https://doi.org/10.4209/aaqr.2012.03.0056  

  • Download: PDF

Cite this article:
May, Y.E., Dorge, S., Jeguirim, M., Trouvé, G. and Said, R. (2012). Measurement of Gaseous and Particulate Pollutants during Combustion of Date Palm Wastes for Energy Recovery. Aerosol Air Qual. Res. 12: 814-825. https://doi.org/10.4209/aaqr.2012.03.0056



Being an important date-producing country, Tunisia generates high quantities of dry date palm residues which are currently not efficiently used, and instead accumulate every year in oasis lands. These by-products could present real advantages for Tunisia for energy production in both economic and environmental terms. Heating installations using biomass generate primary pollutants, such as CO, VOC and Particle Matter (PM), these latter having the most important adverse impact on environment. Measurements of these pollutants are needed, because international certification organizations require drastic limits on CO and PM emissions from biomass combustion processes.

In this study, date palm leaflets (DPL), date palm rachis (DPR), date palm trunks (DPT) and date stones (DS) were combusted in a laboratory scale mobile furnace. The aim of this work was to find an appropriate of these materials for energy recovery, with low emission factors of gaseous and PM in the exhaust. Combustion tests were performed at two temperatures (500°C and 800°C) and input air flow rates (25 and 50 NL/h). With the lowest content of chlorine and the highest bulk and energetic densities, DS is the most convenient date palm residue for energy recovery. Combustion of DPL, DPR and DPT needs to be performed at high temperature to obtain a complete carbon balance, and this is not required for the combustion of DS, which has a value of 88% for the carbon balance at 500°C.

Particles emitted during combustion are mainly constituted of fine and ultrafine particles. For all samples, 99% are particles with diameters below 1 μm. Combustion of DS produces the lowest content of PM0.1, leads to the lowest emissions factors of aerosols, and generates fewer tars than the other date palm by-products. An increase in the input air flow rate, and therefore decrease in the residence time during combustion of DS, generates a larger amount of aerosols.

Keywords: Emission factor; Aerosols; Thermal oxidation; Date palm waste; Gas release

Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

77st percentile
Powered by
   SCImago Journal & Country Rank

2022 Impact Factor: 4.0
5-Year Impact Factor: 3.4

Aerosol and Air Quality Research partners with Publons

CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit
CLOCKSS system has permission to ingest, preserve, and serve this Archival Unit

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.