Janek Uin , Eduard Tamm, Aadu Mirme

  • University of Tartu, Institute of Physics, Laboratory of Environmental Physics, Ülikooli 18, 50090, Tartu, Estonia

Received: May 24, 2011
Revised: June 20, 2011
Accepted: June 20, 2011
Download Citation: ||https://doi.org/10.4209/aaqr.2011.05.0068  

  • Download: PDF


Cite this article:
Uin, J., Tamm, E. and Mirme, A. (2011). Very Long DMA for the Generation of the Calibration Aerosols in Particle Diameter Range up to 10 µm by Electrical Separation. Aerosol Air Qual. Res. 11: 531-538. https://doi.org/10.4209/aaqr.2011.05.0068


 

ABSTRACT


For the generation of the quasi-monodispersed standard (calibration) aerosols, the electrical separation of particles from the aerosol with wide size spectrum can be used in quite a wide particle diameter range, from some nanometers up to approximately 10 micrometers. A solution to the problem of multiple elementary charges on the particles, degrading the quality of the separated aerosol in the range of large particles, was proposed in a separate paper. In this paper, a unique very long DMA for the separation of such large particles is described, together with a technology for its manufacturing. Effects of some possible non-ideal properties of the DMA, arising from the manufacturing techniques used, are investigated both theoretically and experimentally; no significant distortions of the DMA transfer function were found. A new method for the experimental determination of the transfer function of the DMA, using Microsphere Size Standards (highly monodisperse polystyrene aerosols) is described. It was confirmed, that electric wind can be a distortion factor of the DMA transfer function and the continuous tracking of it, when separating standard aerosols, is necessary. Effect of gravity on the DMA transfer function is also discussed.


Keywords: DMA; Electrical separation; Calibration; Transfer function

Don't forget to share this article 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.