In-Ho Choi1, Wan-Kuen Jo 2

  • 1 CleanSys Tele-Monitoring Yeongnam Center, Ulsan, 689-800, Korea
  • 2 Department of Environmental Engineering, Kyungpook National University, Daegu, 702-701, Korea

Received: March 2, 2011
Revised: May 26, 2011
Accepted: May 26, 2011
Download Citation: ||https://doi.org/10.4209/aaqr.2011.03.0020  

  • Download: PDF


Cite this article:
Choi, I.H. and Jo, W.K. (2011). Application of Stack Emissions Data from Tele-Monitoring Systems for Characterization of Industrial Emissions of Air Pollutants. Aerosol Air Qual. Res. 11: 412-418. https://doi.org/10.4209/aaqr.2011.03.0020


 

ABSTRACT


Real monitoring data are required for the validation of models or methods used to estimate industrial emission inventories of air pollutants. As such, the current study investigated the industrial emissions of four major and three other hazardous air pollutants in four subareas of the Yeongnam area in Korea over five years (2005 through 2009), using direct stack monitoring concentrations, which were obtained from tel-monitoring systems. Yearly variations in the industrial emissions of the target pollutants depended upon the subareas and chemical types. For example, the total suspended particulate (TSP) emissions in Geongnam increased for two consecutive years (2007 and 2008) and then, decreased in 2009, whereas the industrial CO emissions in Ulsan sharply increased since 2007. For TSP, primary metal manufacturing (PMM) and Power, electricity and gas supplying companies (PEGSC) were two major industrial emission sources. PEGSC exhibited the highest source for both SO2 and NOx emissions, followed by PMM and petroleum and petrochemical companies in descending order. For CO emissions, PPM exhibited the highest source, followed by municipal waste treatment and intermediate waste treatment facilities in descending order. Both NH3 and HF were emitted primarily from two subareas (Ulsan and Geongbuk), which have fertilizer production companies. Both Geongnam and Geongbuk exhibited the highest and the second highest HCl emissions, presumably due to emissions during the acid treatment processes of various metals. Most of the industry categories, which are associated with fuel combustions or waste incineration, exhibited the highest and the second highest emission proportions for NOx and SO2, respectively. Maximum emissions were observed in the winter or summer season, while minimum emissions were observed in the spring or fall season, presumably due to increased energy utilizations for residential as well as industrial heating and cooling.


Keywords: Industrial source; Seasonal variation; Industrial category; Fuel-combustion; Waste incineration


Share this article with your colleagues 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

5.9
2020CiteScore
 
 
81st percentile
Powered by
Scopus


Aerosol and Air Quality Research partners with Publons

Special Call for Papers Air Pollution and its impact in South and Southeast Asia

2020 Impact Factor: 3.063
5-Year Impact Factor: 2.857

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.