Kambiz Nazridoust1, Goodarz Ahmadi1, Chaosheng Liu1, Andrea R. Ferro2, Timothy R. McAuley3, Peter A. Jaques4, Philip K. Hopke 4

  • 1 Department of Mechanical & Aeronautical Engineering, Clarkson University, Potsdam, N.Y. 13699, USA
  • 2 Department of Civil & Environmental Engineering, Clarkson University, Potsdam, N.Y. 13699, USA
  • 3 Consulting for Health, Air, Nature, & a Greener Environment (CHANGE), Queensbury, N.Y. 12804, USA
  • 4 Center for Air Resources Engineering and Science, Clarkson University, Potsdam, NY 13699, USA

Received: January 27, 2011
Revised: October 19, 2012
Accepted: October 19, 2012
Download Citation: ||https://doi.org/10.4209/aaqr.2011.01.0004  

  • Download: PDF

Cite this article:
Nazridoust, K., Ahmadi, G., Liu, C., Ferro, A.R., McAuley, T.R., Jaques, P.A. and Hopke, P.K. (2013). Distribution of Nanoparticles near a Major U.S. and Canada Trade Bridge: Comparison of Simulations with Field Data. Aerosol Air Qual. Res. 13: 3-12. https://doi.org/10.4209/aaqr.2011.01.0004



Dispersion of ultrafine particles arising from traffic emissions on a major international bridge (the Peace Bridge) between U.S. and Canada was studied during the summer of 2004. A computational model for evaluating the transport and dispersion of vehicular emissions from the Peace Bridge Complex (PBC) into the downwind neighborhood was developed to improve the estimation of ultrafine particle number concentrations in this area of Buffalo, New York. An unstructured computational grid of the Peace Bridge and its vicinity was generated and the mean airflow was simulated using the standard k-ε turbulence model in the FLUENTTM code (ANSYS, Inc, Canonsburg, PA). A Discrete Random Walk (DRW) model was used to simulate the instantaneous turbulence fluctuating velocity. A Lagrangian particle-tracking model was used to simulate the transport and dispersion of particles from the motor vehicles on the bridge and in the Peace Bridge Plaza area. The particle transport model accounts for the drag and Brownian forces acting on the particle, as well as the gravitational sedimentation effects. These results were compared with a series of particle size distribution measurements made over the region of interest. For particulate emissions measured in the size range of 16 to 166 nm, the simulated size-fractionated particle concentrations show agreement with the field measurements with estimated errors of approximately 15%. These results suggest that CFD modeling could provide the basis for reasonable estimates of the exposure from specific major roads in the downwind area.

Keywords: Particle number concentrations; Size-distribution; Peace bridge; Computer model; Lagrangian

Don't forget to share this article 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

Latest coronavirus research from Aerosol and Air Quality Research

2018 Impact Factor: 2.735

5-Year Impact Factor: 2.827

SCImago Journal & Country Rank