Sergey A Grinshpun 1, Chunlei Li1, Atin Adhikari1, Michael Yermakov1, Tiina Reponen1, Mirko Schoenitz2, Edward Dreizin2, Vern Hoffmann2, Mikhaylo Trunov3

  • 1 Center for Health-Related Aerosol Studies, Department of Environmental Health, University of Cincinnati, Cincinnati, OH 45267, USA
  • 2 Department of Chemical, Biological and Pharmaceutical Engineering, New Jersey Institute of Technology, Newark, NJ 07102, USA
  • 3 Reactive Metals, Inc., Newark, NJ 07103, USA

Received: September 30, 2010
Revised: September 30, 2010
Accepted: December 29, 2016
Download Citation: ||  

  • Download: PDF

Cite this article:
Grinshpun, S.A., Li, C., Adhikari, A., Yermakov, M., Reponen, T., Schoenitz, M., Dreizin, E., Hoffmann, V. and Trunov, M. (2010). Method for Studying Survival of Airborne Viable Microorganisms in Combustion Environments: Development and Evaluation. Aerosol Air Qual. Res. 10: 414-424.



Inactivation of airborne microorganisms due to thermal or chemical air treatment has gained considerable attention. Destruction of aerosolized biothreat agents in environments containing combustion products is particularly relevant to military and counterterrorism situations because some pathogens may survive an explosion or fire in a bio-weapon facility and be dispersed in the atmosphere. Energetic materials with biocidal properties are being sought to effectively inactivate stress-resistant aerosolized microorganisms. Consequently, appropriate methods are needed to test these materials. We designed and built a state-of-the-art experimental facility and developed protocols for assessing the survival of aerosolized microorganisms exposed to combustion. The facility uses a continuous-flow design and includes an aerosolization unit, a test (combustion) chamber, and a measurement system for bioaerosol particles exposed to combustion environments for sub-second time intervals. The experimental method was tested with Bacillus endospores. We assessed the inactivation of aerosolized spores exposed to a gaseous hydrocarbon flame and to combustion of aluminum-based energetic composites (including a novel iodine-containing filled nanocomposite material). Two combustion configurations were evaluated – a vertical strand containing a consolidated material and a specially designed burner in which a fuel powder is fed into a gaseous hydrocarbon flame. It was established that the bioaerosol inactivation may be overestimated due to exposure of spores on collection filters to the combustion products throughout the test. The overestimation can be mitigated by reducing the collection time and minimizing the formation of soot. The experimental facility and method developed in this study enables evaluating effects caused by biocidal products during combustion. The present version of the set-up provides the capability of detecting inactivation levels of ~2.2 × 105 (over five-log viability reduction) its further design modifications can potentially enable measuring bioaerosol inactivation as high as ~107. The method was utilized for establishing feasibility of the new iodine-containing material for microbial agent defeat applications.

Keywords: Bioaerosols; Combustion aerosols; Hazardous air pollutants

Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.