C. Kim, K.C. Noh, J. Hwang

  • School of Mechanical Engineering, Yonsei University, 134 Sinchon-dong, Seodaemun-ku, Seoul 120-749, Republic of Korea

Received: December 29, 2016
Revised: September 30, 2010
Accepted: September 30, 2010
Download Citation: ||https://doi.org/10.4209/aaqr.2010.03.0019  

  • Download: PDF

Cite this article:
Kim, C., Noh, K. and Hwang, J. (2010). Numerical Investigation of Corona Plasma Region in Negative Wire-to-duct Corona Discharge. Aerosol Air Qual. Res. 10: 446-455. https://doi.org/10.4209/aaqr.2010.03.0019



Electrostatic precipitators make use of corona discharge phenomena to remove airborne dust particles. Exact assessment of the electric field and charge density distribution is essential to understand the particle behavior and the flow dynamics inside the electrostatic precipitators. The Poisson and charge conservation equations were solved to evaluate the electric field and charge density distributions in the negative wire-to-duct electrostatic precipitator. In this article, a novel computation method calculating the plasma region thickness was presented with the plasma region model. Instead of the conventional Kaptzov’s hypothesis, a boundary condition for the charge density was suggested as a function of applied voltage. When the computation model and the charge boundary condition above were applied to previous experiments, the results showed good agreements with the experimental data. The estimated plasma region thickness was approximately 1.5–2.5 times greater than the wire radius in the wire radius range of 0.15 mm to 1.6 mm.

Keywords: Corona discharge; Plasma region; Charge density; Plasma region thickness; Numerical investigation

Share this article with your colleagues 


Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.