Z.L. Gu 1, J. Qiu2, Y.Z. Zhao3, X.P. Hou2

  • 1 Department of Environmental Science and Technology, School of Human Settlements and Civil Engineering, Xi’an Jiaotong University, Xi’an 710049, P.R. China
  • 2 School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
  • 3 Department of Chemical Engineering, Tsinghua University, Beijing 100084, P.R. China

Received: February 29, 2008
Revised: February 29, 2008
Accepted: February 29, 2008
Download Citation: ||https://doi.org/10.4209/aaqr.2007.03.0026 

  • Download: PDF

Cite this article:
Gu, Z., Qiu, J., Zhao, Y. and Hou, X. (2008). Analysis on Dust Devil Containing Loess Dusts of Different Sizes. Aerosol Air Qual. Res. 8: 65-77. https://doi.org/10.4209/aaqr.2007.03.0026



Dust devil in convective boundary layer (CBL) was simulated by Euler-Lagrange approach. By means of large-eddy simulation method and smoothly stretched grid, flow fields of the small scale whirlwind were obtained. Movements of 20,000 dust particles were tracked by computing external forces and velocities with the aid of the simulated high-resolution air flow fields. Characteristics of the simulated airflow were in good accordance with field observations. Distribution of particles reproduced the shape of dust devil. Statistics of particle trajectories revealed basic properties of the movement of dust particles. Small particles with diameter of 0.04 mm were able to form a rolling cylinder and to be lifted easily to a certain height. 0.1 mm dust particles spiraled upwards like a cone with a small cone angle. Particles with diameters of 0.16 mm and 0.3 mm were obviously thrown outward with limited lifting height and fell back to the ground. The negative vertical pressure gradient in the dust devil strengthened particle lifting, unlike in the horizontal wind systems where the vertical pressure gradient isn’t the major driving force. Numerical results showed why total suspended particulates (TSP) concentration exceeded the standard value greatly all the year round on the Loess Plateau, where the loess dust from the local ground was one of the major sources of air pollutants. 90% loess dusts were smaller than 0.04 mm in diameter, which made them easily lifted to a high altitude by dust devils even without obvious horizontal wind. Because thermal plumes are common in CBL, dust devils can occur frequently in multi-locations of the Loess Plateau. According to nature circumstances of the Loess Plateau and thermodynamic characteristics of dust devil, the dust-devil-scale simulation indicated one source of the background TSP on the Loess Plateau and how they were lifted into the atmosphere.

Keywords: Model simulation; Particle size; Dust devil; Gas-particle flow; Convective boundary layer

Impact Factor: 2.735

5-Year Impact Factor: 2.827

SCImago Journal & Country Rank

Enter your email below to receive latest published articles in your field.