Tzu-Ting Yang 1, Yu Mei Kuo2, Hsueh Fen Hung1, Ruei Hao Shie3, Paul Chang3

  • 1 Department of Environmental Engineering and Health, Yuanpei University, No. 306, Yuanpei St., Hsin Chu, Taiwan, Republic of China
  • 2 Department of Occupational Safety and Hygiene, Chung Hwa University of Medical Technology, 89, Wen-Hwa 1st Street, Jen-Te Hsiang, Tainan Hsien, 717, Taiwan
  • 3 Industrial Technology Research Institute, No. 195 Chung Hsing Rd., Sec. 4 Chu Tung, Taiwan

Received: August 31, 2007
Revised: August 31, 2007
Accepted: August 31, 2007
Download Citation: ||https://doi.org/10.4209/aaqr.2007.03.0015  

  • Download: PDF


Cite this article:
Yang, T.T., Kuo, Y.M., Hung, H.F., Shie, R.H. and Chang, P. (2007). Gas Pollutant Emissions from Smoldering Incense Using FTIR. Aerosol Air Qual. Res. 7: 417-431. https://doi.org/10.4209/aaqr.2007.03.0015


 

ABSTRACT


This study characterized the effects of smoldering incenses and combustion conditions on gaseous pollutant yields. Incense comes in three types: non-smoke (A), reduced-smoke (B) and traditional-smoke incense (C and D). Each incense type was burned in a test chamber with various combustion conditions (airflow rate and relative humidity). An extractive Fourier transform infrared (FTIR) was used to measure gas pollutants from smoldering incense in real time. Concentrations of methane, ethylene, methanol, formaldehyde and ammonia were measured using the IR spectra of smoldering incense samples. The resulting order of total emission factors of the identified gas pollutants (sum of methane, ethylene, methanol, formaldehyde and ammonia) were non-smoke < reduced-smoke < traditional smoke incenses. Total gas-pollutant emission rates and factors increased logarithmically as the airflow rate increased (2–28 L/min). Finally, the emission rates and factors of ethylene and methane decreased linearly as relative humidity increased (18–97%), while those for ammonia, methanol and formaldehyde increased. Results can be utilized to solve indoor air pollution problems caused by burning incense. Assuming that incense will continue to be burned when paying respect to ancestors, using incense made of low-volatility materials, with high carbon levels, low airflow rates and high environmental relative humidity can minimize gas-pollutant production.


Keywords: Incense; Smoldering; Emission rate and factors


Share this article with your colleagues 

 

Subscribe to our Newsletter 

Aerosol and Air Quality Research has published over 2,000 peer-reviewed articles. Enter your email address to receive latest updates and research articles to your inbox every second week.

6.5
2021CiteScore
 
 
77st percentile
Powered by
Scopus
 
   SCImago Journal & Country Rank

2021 Impact Factor: 4.53
5-Year Impact Factor: 3.668

Aerosol and Air Quality Research partners with Publons

Aerosol and Air Quality Research partners with Publons

Aerosol and Air Quality Research (AAQR) is an independently-run non-profit journal that promotes submissions of high-quality research and strives to be one of the leading aerosol and air quality open-access journals in the world. We use cookies on this website to personalize content to improve your user experience and analyze our traffic. By using this site you agree to its use of cookies.