OPEN ACCESS

Articles online

Computer Simulation Studies of Structure Characteristics of Ordered Mesoporous Carbons and its Naphthalene Adsorption Performance

Category: Others

Accepted Manuscripts
DOI: 10.4209/aaqr.2016.12.0562
PDF | RIS | BibTeX

Keliang Wang1, Mingli Fu2, Junliang Wu2, Guangying Zhou3, Daiqi Ye 2

  • 1 Guangdong Polytechnic of Environmental Protection Engineering, Guangdong 528216, China
  • 2 School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
  • 3 School of Chemistry and Environment, South China Normal University, Guangzhou 510006, China

Highlights

GCMC was performed for the first time to simulate the naphthalene adsorption in OMCs.
Atomic structure model of OMCs was built for the first time by molecular modeling.
Adsorption state of naphthalene was from monolayer to multilayer in the mesopore.


Abstract

We could draw some valuable conclusions about adsorption capacity, adsorption isotherm, adsorption kinetics, adsorption thermodynamics by naphthalene adsorption experiments, but the experiments could not tell us directly what the adsorption location and adsorption state are exactly on the surface of OMCs. Actually, we still don’t know the microscopic structure of OMCs very well because of the restriction of characterization technology, human factor and experimental conditions. However, molecular simulation technology could make up the disadvantages. In the work, Grand Canonical Monte Carlo method was performed for the first time to simulate the naphthalene adsorption behavior in OMCs structure model. The atomic structure model of OMCs was built firstly by using molecular modeling technique and was characterized by calculating the accessible solvent surface area, total pore volume, and small-angle X-ray diffraction patterns. The calculated results showed that the structure model of OMCs was reasonable and the structure characteristic was in agreement with experimental data. The adsorption isotherm curve is of type Langmuir IV, which was typical characteristic of ordered mesoporous materials. Also, adsorption isotherm curve revealed that the adsorption capacity of naphthalene on OMCs increased to a balance gradually, and the maximum adsorption capacity of naphthalene was 105.4 mg g–1. Additionally, the adsorption state of naphthalene were observed that from monolayer to multilayer in the mesopores with the increasing of number of naphthalene molecules.
This work deepened the understanding of the adsorption state of naphthalene for OMCs on mesoscopic level. It also demonstrated that the GCMC method is effective for studying the adsorption process and gives useful guidance on research of structure-activity relationship and performance prediction of the carbon material.

Keywords

Grand Canonical Monte Carlo Ordered mesoporous carbons Adsorption Naphthalene


Related Article

Nano- and Submicron Particles Emission during Gas Tungsten Arc Welding (GTAW) of Steel: Differences between Automatic and Manual Process

Elena Baracchini, Carlotta Bianco, Matteo Crosera, Francesca Larese Filon, Elena Belluso, Silvana Capella, Giovanni Maina, Gianpiero Adami
Accepted Manuscripts
DOI: 10.4209/aaqr.2017.07.0226
PDF

Testing Water Yield, Efficiency of Different Meshes and Water Quality with a Novel Fog Collector for High Wind Speeds

Christian Schunk , Peter Trautwein, Herbert Hruschka, Ernst Frost, Leslie Dodson, Aissa Derhem, Jamila Bargach, Annette Menzel
Accepted Manuscripts
DOI: 10.4209/aaqr.2016.12.0528
PDF

A Case Study on Fog/Low Stratus Occurrence at Las Lomitas, Atacama Desert (Chile) as a Water Source for Biological Soil Crusts

Lukas W. Lehnert , Boris Thies, Katja Trachte, Sebastian Achilles, Pablo Osses, Karen Baumann, Jakob Schmidt, Elena Samolov, Patrick Jung, Peter Leinweber, Ulf Karsten, Burkhard Büdel, Jörg Bendix
Accepted Manuscripts
DOI: 10.4209/aaqr.2017.01.0021
PDF
;